Contact

Dr.-Ing Tim Herrig

© projektelf

Tim Herrig studied Mechanical Engineering with a focus on Production Engineering at the RWTH Aachen University. He completed his master's degree in Machine Development and Automation in 2014. From August 2014, he worked as a research assistant in the department "Ablative Manufacturing Processes" at the Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University. At the beginning of 2018, he took over the group leadership "Fundamentals of Ablative Manufacturing Processes". In March 2018 Tim Herrig additionally took over the group leadership "Electroerosive Ablation and Waterjet" at Fraunhofer IPT. Since the beginning of 2020, he has been head of the department "Water Jet Machining and Electroerosive Ablation" at the Fraunhofer IPT.

Publications at Fraunhofer IPT

Publications at Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University

Bergs, Thomas; Tombul, Ugur; Herrig, Tim; Klink, Andreas; Welling, David
Influence of an Additional Indexing Rotary Axis on Wire EDM Performance for the Automated Manufacture of Fir Tree Slots
Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2019; Volume 6: Ceramics; controls, diagnostics and instrumentation; education; manufacturing materials and metallurgy, 2019, 7 pp.

Bergs, Thomas; Tombul, Ugur; Herrig, Tim; Olivier, Marcel; Klink, Andreas; Klocke, Fritz
Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM
Procedia Manufacturing, 18/2018, pp. 138 - 145
Full Text

Klocke, Fritz; Welschof, Lukas; Herrig, Tim; Klink, Andreas
Evaluation of Contemporary Wire EDM for the Manufacture of Highly Loaded Titanium Parts for Space Applications
Procedia Manufacturing, 18/2018, pp. 146 - 151
Full Text

Klocke, Fritz; Herrig, Tim; Klink, Andreas
Evaluation of Wire Electrochemical Machining With Rotating Electrode for the Manufacture
of Fir Tree Slots

Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018; Volume 6: Ceramics; controls, diagnostics and instrumentation; education; manufacturing materials and metallurgy, 2018, 6 pp.

Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas
Experimental Investigations of Cutting Rates and Surface Integrity in Wire Electrochemical
Machining with Rotating Electrode

Procedia CIRP, 68/2018, pp. 725 - 730
Full Text

Li, Hongying; Klocke, Fritz; Zeis, Markus; Herrig, Tim; Heidemanns, Lukas
Experimental study on the ECM and PECM of pressed and casted γ-TiAl alloys for aero engine applications
Procedia CIRP, 68/2018, pp. 768 - 771
Full Text

Herrig, Tim; Oßwald, Kai; Lochmahr, Ingo; Klink, Andreas; Klocke, Fritz; Bergs, Thomas
High Speed Wire EDM flushing approach for wire electrochemical machining
Proceedings of the 14th INSECT 2018: International Symposium on ElectroChemical Machining Technology 2018, 2018, pp. 55 - 62

Klocke, Fritz; Olivier, Marcel; Degenhardt, Ulrich; Herrig, Tim; Tombul, Ugur; Klink, Andreas
Investigation on Wire-EDM Finishing of Titanium Nitride Doped Silicon Nitride in CH-based Dielectrics
Procedia CIRP, 77/2018, pp. 650 - 653
Full Text

Klocke, Fritz; Welschof, Lukas; Herrig, Tim; Klink, Andreas
Model-based Productivity Analysis of Wire EDM for the Manufacturing of Titanium
Procedia CIRP, 77/2018, pp. 594 - 597
Full Text

Bergs, Thomas; Herrig, Tim; Harst, Simon; Klink, Andreas
Proceedings of the 14th INSECT 2018: International Symposium on ElectroChemical Machining Technology 2018
219 pp.

Klink, Andreas; Hlavac, Marcus; Herrig, Tim; Holsten, Maximilian
Technological and Economical Assessment of Alternative Process Chains for Turbocharger Impeller Manufacture
Procedia CIRP, 77/2018, pp. 586 - 589
Full Text

Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas
Comparison of the electrochemical machinability of electron beam melted and casted gamma titanium aluminide TNB-V5
Journal of Engineering Manufacture, Vol. 232, 4/2017, pp. 586 – 592

Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas
Investigation of a new Flushing Principle for Wire Electrochemical Machining (WECM)
Proceedings INSECT 2016: International Symposium on Electrochemical Machining Technology 2016, 2016, pp. 21 – 28

Klocke, Fritz; Herrig, Tim; Zeis, Markus; Holsten, Markus; Klink, Andreas
Results of Surface Integrity and Fatigue Study of PECM and PEO Processed γ-TiAl for Turbine Applications
Procedia CIRP, 42/2016, pp. 131 - 136
Full Text

Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas
Experimental Research on the Electrochemical Machinability of selected γ-TiAl alloys for the Manufacture of Future Aero Engine Components
Procedia CIRP, 35/2015, pp. 50 – 54
Full Text

Klocke, Fritz; Zeis, Markus; Herrig, Tim; Harst, Simon; Klink, Andreas
Experimental and numerical Analysis of Gas Evolution and Transport during Electro-chemical Machining and their Effect on material Removal
International Symposium on Electrochemical Machining Technology INSECT 2014 Proceedings, 2014, pp. 219 - 226

Klocke, Fritz; Herrig, Tim; Hensgen, Lars; Klink, Andreas
Funkenerosive und elektrochemische Verfahrenseinflüsse auf die Oberflächen- und Randzonenausbildung für den Werkzeug- und Formenbau
Der Stahlformenbauer, Vol. 30, 6/2014, pp. 18 - 21

Klocke Fritz; Zeis, Markus; Herrig, Tim; Harst, Simon; Klink, Andreas
Optical In Situ Measurements and Interdisciplinary Modeling of the Electrochemical Sinking Process of Inconel 718
Procedia CIRP, 24/2014, pp. 114 - 119
Full Text

Klocke, Fritz; Zeis, Markus; Harst, Simon; Herrig, Tim; Klink, Andreas
Analysis of the Simulation Accuracy of Electrochemical Machining Process Based on the Integration Level of Different Physical Effects
International Symposium on ElectroChemical Machining Technology, INSECT 2013. Proceedings, 2013, pp. 165 - 170